How To Clean Your Filthy Showerhead in 5 Easy Steps
-
Loading... - Adika Lestari
- 14 Jun 2022
- 256 Views
- 0 Like
- 0 Comment
We know the shower drain gets clogged from time-to–time and needs to be regularly cleaned for maintenance, and the showerhead is similar, since they both can get clogged if not cleaned frequently and enough.
How Does a Showerhead Get Dirty and Clogged?
“A clogged showerhead is likely due to a buildup of mineral deposits from the water that flows through it,” says Kathy Cohoon, cleaning expert with Two Maids & A Mop. And dirt is more likely to accumulate inside a showerhead if you take long, hot showers every day, too.
The longer and hotter the shower, the more damage you’re causing and the more rapid the build up. The metal material that’s in a showerhead is more likely to rust when exposed to heat—especially when exposed for a long duration and with every use.
Another reason why dirt may get trapped in a showerhead is due to poor cleaning habits, where you’re not properly cleaning your showerhead or you’re waiting too long to clean it. When you don’t clean your showerhead often enough, there’s more opportunity for the showerhead to clog due to build up of calcium deposits, grime and other kinds of debris.
Plus, a dirty showerhead can even wreak havoc on your skin and hair health, too, due to bacteria, hard water and mold, all of which may be lurking in your showerhead and can lead to skin infections and disease, unless properly monitored and managed.
Although a clogged showerhead can be frustrating, the individual mineral particles are small and so are pretty easy to break down, as long as you’re using the right solution, for most effective results. If you're hoping to prevent clogs and build up of debris (as well as avoid skin problems), you need to routinely clean your showerhead. But that's easier than you might think. Follow along with the steps below.
How To Clean a Showerhead: A Step-by-Step Guide
What you'll need:
- screwdriver
- distilled vinegar
- plastic bag
- rubber band (or zip tie)
- plastic scrub brush
- mold and mildew remover (optional)
1. First, unscrew your showerhead with a screwdriver or wrench and remove it from the holder.
2. Pour vinegar into a plastic bag that’s large enough to fit around the showerhead.
3. Using a rubber band or zip tie, secure the bag around the showerhead, with the head fully submerged. Leave the showerhead submerged for at least an hour or overnight, the latter for when you really need a deep cleaning. The vinegar should loosen the mineral deposits naturally over time.
4. After you’ve allowed the head to soak and the vinegar solution to loosen deposits and other debris, remove the bag of vinegar and scrub away at the loosened material with a plastic scrub brush (or a spare toothbrush). Continue cleaning and scrubbing, until you’ve cleared away all signs of buildup and any gunk that’s causing the clog and is stuck in the showerhead. Read More...
