Why I think external zoom lenses should be a thing of the past
-
Loading... - Brielle Durand
- 06 Jul 2022
- 122 Views
- 0 Like
- 0 Comment
External zoom lenses were all the rage in the early 40s, right up to the 60s where lens manufacturers had the idea to build zoom lenses that had the zoom mechanism built inside the lens itself so the overall length of the lens stayed the same.
This helped with taking images in tight spaces, being more balanced while taking photos, and overall build quality was superior to that of the push-pull or extended zoom lenses of yesteryear.
So can someone please tell me why, in 2022, camera manufacturers are still building lenses with an external zoom design? The best zoom lenses(opens in new tab) – in my opinion – are the internal zooms.
I can understand that with some lenses cost is a key factor, and making the lens expand does indeed cut costs and make it more accessible to the end user. That said, Sony has had it sorted for some years now, Sigma is also following suit, which is great to see – but why can’t the big names in the photography industry follow the same path.
I remember the Nikon 28-70mm and the newer 24-70mm f/2.8 both being external zoom lenses. I personally had 3 of them over the years, and every single one got stuck at a certain focal length, because due to the design they couldn’t take a knock, dump, jump or speck of dust without breaking. These were meant to be professional grade lenses and they all were struck down by the inferior decision flaw of being external zooms.
External zoom lens run along a mechanism that allows the elements to move in sync, so when you zoom in to say 28mm to 70mm, the lens will either expand or retract to gain the correct focal length or focus if it is a fixed prime lens.
Because of the way in which the inner lens barrel has to move to gain its focus or zoom, lenses that use this design are not as weather-sealed as their internal focus counterparts. I have seen lenses that cost between £300 / $500 – £2,000 / $4,000 and all of them became prone to collecting dust within the elements because of the nature of the design.
I have seen many lenses, (not just from Nikon, of course) that have suffered from this design and it scares me that as we move even further down the mirrorless era, lenses are also being produced with this same lens structure. So, why should you pay a lot of money for a worse design?
A lot of the Canon RF range for example follow this design structure and personally, I can see a lot of theses lenses going in for servicing when they take a knock or eventually when dust goes into the lens elements. Read More...
