Learn How to Connect Linksys Wifi Extender With WPS
-
Loading... - Ashly Wilsin
- 17 Sep 2022
- 82 Views
- 0 Like
- 0 Comment
Linksys Extender Setup is configure with the web setup page extender.linksys.com. The wifi range extender setup when configure correctly let you start with advanced setting. Nowadays, people use advanced and high-frequency WiFi routers to cover their internet needs.
But In some places, the signal is weak, or no internet in this place. These areas are called dead network spots or areas. Setup Linksys WiFi extender instead of a new router. Linksys extender reduces the installation cost to a third of the router.
Linksys WiFi extender increases the signal strength, so you can enjoy the internet through your home or work. So now the question arises, how to perform Linksys WiFi Extender Setup WPS. Well, to do that, you have to prepare a few things.
Setup Linksys extender -extender.linksys.com using WPS Button
The WPS is Wi-Fi Protected Setup. This button works on one device at a time. The WPS button is on the router’s front or back panel of your Linksys extender. Many routers have no WPS feature.
The main task of the WPS button is that its functions as the network security standard which makes connections with the router and the wireless device faster. Follow the below-mentioned steps:
1- Linksys extender Wifi setup completed using two methods. Before stepping towards that, you need to understand some necessary prerequisites of the Linksys WiFi extender setup.
2- Ensure that the Linksys WiFi range extender router is connected correctly (extender.linksys.com).
Connect the Linksys WiFi range extender into an electrical switch.
3- Wait for a few seconds when the power LED on your Linksys WiFi extender turns to solid.
So press the WPS button present at the back or side panel of the device.
Important Note: When you setup Linksys WiFi extender without visiting extender.linksys.com, ensure that your home WiFi router and wireless extender are in the same place.
How to open Linksys wifi Extender Setup – extender.linksys.com page
To perform Linksys wifi Extender Setup via wireless protected setup (WPS) method, follow the below-mentioned steps:
1- Ensure that your home Linksys WiFi extender setup (extender.linksys.com) is set up correctly.
2- So now, plug in your Linksys extender into an electrical power switch.
3- Wait until the power LED on your Linksys WiFi extender turns to solid amber.
4- Press the WPS button present at the back or side panel of the device.
Important Note: While configuring your Linksys WiFi Extender without visiting Linksys.com, ensure both your home Wi-Fi router and wireless extender are in the same room.
How to Setup Linksys WiFi extender By Using Extender.linksys.com?
Linksys wifi Extender Setup can be done through offline page Extender.Linksys.com, or Extender.Linksys.Setup. But one has to understand that these pages are Extender.Linksys.com and Extender.Linksys.Setup can’t be accessed in online mode.
Steps to be followed are:-
1- Firstly, Plug in your Linksys extender to a power outlet.
2- Now for setup, type http://extender.linksys.com or http://192.168.1.1 in the address bar.
3- If the Linksys extender setup page doesn’t come up, change the browser.
4- On the setup page, Because it will ask you how you would like to configure Linksys Extender.
5- Hit Linksys wifi Range extender option or Access point according to your need.
6- Select the WiFi network which you want to extend.
7- So follow the online instructions and your setup will be completed.
8- Lastly, the After Setup Successful Connection page will close automatically.
9- Plug the extender using the Spot finder so that you will get fast internet with maximum Signal Strength.
How to setup linksys wifi extender as acess points?
​Learn How to setup linksys extender as an access point”. Firstly a quick intro about the access point. Because It is a method in which your Linksys Extender Setup as a router which means we can setup multiple Linksys Extenders on this one.
So, the steps are:-
1- First and foremost Check the slider button on the Linksys WiFi Range Extender itself, whether it is on the side marked as EXTENDER or is towards the side marked as the ACCESS POINT.
2- To set it up as an ACCESS POINT it is mandatory to be towards the access point side.
3- Hardwire your Linksys Extender directly to your router’s LAN port.
4- So now you just have to log in to your Linksys extenders setup page.
5- So you can do that by directly typing the “default IP address” i.e. 192.168.1.1 or you can type Linksys
6- Extender setup or Extender.linksys.com on your browser into the Address bar.
7- Lastly, follow the on-screen instructions and your Linksys extender will be set up as a Linksys Setup ACCESS POINT.
Linksys extender setup with Mac Address
For Linksys RE6400, RE6300, and RE6700, just enter http://RE6XOO-XXX inside the location bar for Windows and http://RE6XOO-XXX.local for Mac clients, to inclination to the keen WiFi arrangement page. The three X, within the end, denotes the last three characters of your router’s MAC address. If you do not skills to seek out the MAC (Media Access Control) address, visit the extender settings page, select status, and click on on WLAN Statistics. Here you’ll find the MAC address of your extender.
Still can get to the extender setup page? Try resetting your Extender
